Configure Fluid Level Sensor - BRP I-Command Evinrude Etec Series User Manual

Configure Fluid Level Sensor

This example illustrates Fluid Level Sensor Configuration for the second of two fuel tanks. Fluid level sensors
for other fluid tanks will configure similarly.
1. Press MENU. Use the UP or DOWN buttons and select SYSTEM SETUP.
Press ENTER.
2. Use the UP or DOWN buttons and select BUS DEVICES
Press ENTER.
3. The gauge will search for devices.
Customize
Pages
Screen
Audio Setup
System Setup
M E N U
1
Eng Warnings
Change Units
Bus Devices
Sleep Mode
Sonar Alarms
Eng/Tank Cfg
M E N U
2
Eng Warnings
Message
Change Units
Bus Devices Searching
Sleep Mode Bus
Sonar Alarms Devices...
Eng/Tank Cfg
3 M E N U
58