BRP I-Command Evinrude Etec Series User Manual page 69

Refill Tank
1. Choose the Refill Tank option to recalibrate the fuel tank level after it has
been filled to full capacity.
Press the ENTER button after fuel tank has been filled.
Note: Only supported when the memory module is used as the fuel remain-
ing source.
Partial Fill
2. Choose the Partial Fill option to maintain the accuracy of the level by
allowing users to input fuel added to the tank.
Use the UP button to enter the quantity of fuel added to the fuel tank.
Use the UP or DOWN button to make adjustments.
Press ENTER when finished.
Note: Only supported when the memory module is used as the fuel remain-
ing source.
Refill Tank
Refill Tank
Partial Fill
Eco Speed Src Press ENTER
after refilling Fuel Rem Src
the fuel tank Rst Trip Fuel
Rst Seasonal
M E N U
1
Refill Tank
Adding Fuel
Partial Fill
Eco Speed Src 0.00 gal
Fuel Rem Src
Press ENTER
Rst Trip Fuel
when finished
Rst Seasonal
M E N U
2
67