Engine Warnings - BRP I-Command Evinrude Etec Series User Manual

Engine Warnings

The I-Command gauges monitor engine conditions and display warnings in the event of a malfunction. Refer
to the outboard Operator's Guide if any engine warnings are displayed.
WARNING MESSAGE
DISPLAYED
Check Engine
Over Temperature
Low Oil Level
Low System Voltage
Rev Limit Exceeded
Throttle Position Sensor
Power Reduction
Neutral Start Protection
Engine Shutting Down
POSSIBLE CAUSE / PROCEDURE
A "Check Engine" condition may be activated when a critical engine con-
dition occurs, or when a service is required:
· A "Critical" condition will activate S.A.F.E. (RPM reduction) - Seek assis-
tance to return to safe harbor immediately and see your dealer.
· A minor service issue will NOT activate S.A.F.E. - See your dealer as
soon as practical.
Engine or EMM above temperature range. Check cooling water to water
intakes.
A low oil level has been detected in the oil tank. Fill tank.
A low voltage condition has been detected. See your dealer.
The RPM limit has been exceeded. Reduce throttle.
A throttle position sensor fault has been detected. See your dealer.
EMM has activated S.A.F.E.
Attempt to start engine while in gear. Shift to neutral.
EMM has activated engine shutdown.
87