Audio Settings - BRP I-Command Evinrude Etec Series User Manual

Audio Settings

The I-Command Digital gauge will emit audible sounds during operation. The key sounds can be turned OFF
or ON.
1. Press MENU.
Use the UP or DOWN buttons to select AUDIO SETUP.
Press ENTER.
2. Use the UP or DOWN buttons to select KEY SOUNDS.
Press ENTER.
3. Use the UP or DOWN buttons to select ON or OFF setting.
Press ENTER when finished.
Customize
Pages
Screen
Audio Setup
System Setup
M E N U
1
Key Sounds
M E N U
2
Key Sounds
Off
On
M E N U
3
79