Power Up - BRP I-Command Evinrude Etec Series User Manual

Power Up

The displays and settings in this digital gauge are controlled by a five-button
keypad. The buttons are:
•UP and DOWN — Use to scroll through and select menu items
•MENU — Use to open basic menu to set up display pages
•PAGES / ENTER — Use to scroll forward through pages, and to select
menu items
•EXIT— Use to scroll backward through pages, close menus, and to
return to a previous page
Turn the ignition key to the ON position. Starting the engine is not required.
The Evinrude E-TEC welcome screen will appear or the Boat Setup menu
will appear.
1. When the Evinrude E-TEC welcome screen appears and the gauge con-
tinues to display a data page then the boat setup has already been com-
pleted. Go to "Information Displays" on page 20.
2. If the Boat setup screen is visible go to Boat Setup.
M E N U
1
Setup Menu
Boat Setup
2
M E N U
16