Reset Values - BRP I-Command Evinrude Etec Series User Manual

Reset Values

RESET VALUES will not clear Engine/Tank configuration or the sensor set-
tings that were previously calibrated or configured.
1. Press MENU.
Use UP or DOWN buttons to select SYSTEM SETUP.
Press ENTER.
2. Use UP or DOWN buttons to select RESET VALUES.
Press ENTER.
Customize
Pages
Screen
Audio Setup
System Setup
M E N U
1
Sonar Alarms
Eng/Tank Cfg
Time Config
Reset Values
Lock Pages
NMEA Info
2 M E N U
80