BRP I-Command Evinrude Etec Series User Manual page 55

3. Use the UP or DOWN buttons to select STAY-ON TIME.
Press ENTER.
4. The stay-on time ranges between two and fifteen seconds. Set the
desired stay-on time using the UP or DOWN buttons.
Press ENTER when finished.
Note: The stay-on time selected applies to all monitored categories.
RPM
Engine Trim
Trim Tabs
Rudder
Stay On Time
M E N U
3
Set Time
Add Page
Remove Page
5 sec
Page Scrolling
Press ENTER
Popups Setup
when finished
M E N U
4
53