Fuel Management - BRP I-Command Evinrude Etec Series User Manual

Fuel Management

Select Fuel Remaining Source
Perform the following procedure on each gauge. The default setting is FLUID LEV SNSR.
1. Press MENU. Use the UP or DOWN buttons and select SYSTEM SETUP.
Press ENTER.
2. Use the UP or DOWN buttons and select FUEL SETUP.
Press ENTER.
3. Use the UP or DOWN buttons and select FUEL REM SRC.
Press ENTER.
Customize
Pages
Screen
Audio Setup
System Setup
M E N U
1
Fuel Setup
Engine Displayed
Speed Range
Press Ranges
Eng Warnings
Change Units
2 M E N U
Refill Tank
Partial Fill
Eco Speed Src
Fuel Rem Src
Rst Trip Fuel
Rst Seasonal
3 M E N U
64