Engine Data - BRP I-Command Evinrude Etec Series User Manual

Engine Data

The I-Command system can monitor up to three engines. The ENGINE DATA option controls which engine is
monitored. Note: This option will only display in multi-engine set-ups.
1. Press MENU. Use the UP or DOWN buttons and select SYSTEM SETUP.
Press ENTER.
2. Use the UP or DOWN buttons and select ENGINE DATA.
Press ENTER.
3. Use the UP or DOWN buttons to select choose PORT, CENTER, OR STARBOARD engine.
Press ENTER.
Repeat this process to assign each engine to its own gauge.
Customize
Pages
Screen
Audio Setup
System Setup
M E N U
1
Fuel Setup
Engine Data
Speed Range
Press Ranges
Eng Warnings
Change Units
M E N U
2
Engines
Port
Center
Stbd
M E N U
3
19