BRP I-Command Evinrude Etec Series User Manual page 75

4. Use the UP or DOWN buttons and select UNCFG PRESS.
Press ENTER.
5. Press ENTER to configure Pressure Sensor.
6. Use the UP or DOWN buttons to make selection.
Press ENTER.
7. The gauge will change the device setting and return to the BUS DEVICES
list.
Press EXIT three times to return to gauge display.
Water Temp
Configuring
Fuel Tank 1
UnCfg F Lev Press ENTER
to Configure Water Press
Press Sensor Oil Tank
Storage Device
M E N U
5
Fuel Pressure
Trns Oil Press
Pitot Speed
Eng Bst Press
Eng Oil Press
Eng Water Press
6
M E N U
Water Temp
Fuel Tank 1
UnCfg Press
Water Press
Oil Tank
Storage Device
M E N U
4
Fuel Pressure
Message
Outside Temp
Changing
Inside Temp
Engine Room Device
Live Well Settings
Eng Water Press
M E N U
7
73