BRP I-Command Evinrude Etec Series User Manual page 100

Troubleshooting Failed Updates
1. If a gauge "times out" or does not successfully update, it will display a blank or white screen.
2. An error message will display if a device times out.
If either of these conditions occur, turn OFF power to the network. Disconnect the all the gauges from the net-
work at their tee connectors. Note which gauge(s) have a blank screen. Turn power back ON.
IMPORTANT: Read the remainder of this section BEFORE continuing.
Repeat the steps in "Update Software" on page 96.
3. After Step 4 of Update Software, an additional message will display.
Use the arrow keys to select YES.
Press the ENT button.
M E N U
1
Software Update
Updating LMF-400
Error
Some devices timed out and may not
have finished reprogramming.
OK
2
Software Update
Updating LMF-400
Warning
No units have been found to
?
reprogram. Do you want to try
anyway?
Yes No
3
98