BRP I-Command Evinrude Etec Series User Manual page 15

Mounting Connectors
When mounting connectors, pay attention to connector alignment. Some connectors may have different
mounting boss dimensions. If necessary, use an appropriate spacer behind the connector.
Mount connectors to a flat mounting surface with screws. Tighten screws by hand. Using a power driver can
over tighten screws and damage connectors.
Incorrect connector mounting can bend and damage the connectors resulting in a broken network connection.
CORRECT INSTALLATION
INCORRECT INSTALLATION
No spacer
Flat mounting
surface
Bend in
Flat mounting
Spacer
connectors
surface
13