Winterize - BRP I-Command Evinrude Etec Series User Manual

Winterize

I-Command digital gauges (with software version 1.4.0 or higher) provide a winterize feature for 2008 or
newer V4 and V6 models only.
Engine must be running to use this option. Refer to Outboard Operator's Guide for complete procedure and
Safety Precautions.
1. Press MENU. Use the UP or DOWN buttons and select SYSTEM SETUP.
Press ENTER.
2. Use the UP or DOWN buttons and select BUS DEVICES.
Press ENTER.
3. The gauge will search for devices.
Customize
Pages
Screen
Audio Setup
System Setup
1 M E N U
Eng Warnings
Change Units
Bus Devices
Sleep Mode
Sonar Alarms
Eng/Tank Cfg
2 M E N U
Eng Warnings
Message
Change Units
Bus Devices Searching
Sleep Mode Bus
Sonar Alarms Devices...
Eng/Tank Cfg
3
M E N U
76