BRP I-Command Evinrude Etec Series User Manual page 53

3. Use the UP or DOWN button to select RPM.
Press ENTER.
4. Use the UP or DOWN button to select OFF to turn off the RPM pop-up, or select SET THRESHOLD.
Press ENTER.
5. The threshold for RPM ranges from 50 to 3,000 RPM. Set the desired RPM value that activates the pop-up
by using the UP or DOWN buttons.
Press ENTER when finished.
RPM
Engine Trim
Trim Tabs
Rudder
Stay On Time
M E N U
3
RPM
Off
Set Threshold
M E N U
4
Set Threshold Add Page
Remove Page
100 rpm
Page Scrolling
Press ENTER
Popups Setup
when finished
M E N U
5
51