Add New Page - BRP I-Command Evinrude Etec Series User Manual

Add New Page

Page displays can be presented in analog or digital format as single, dual, or
quad displays.
In addition to analog or digital gauge displays, seven other pages can be
added. They are:
•Trim Tabs - requires sending unit
•GPS Position - requires GPS module
•Rudder - requires sending unit
•Clock - requires GPS module
•Fuel Manager (labeled as Fuel Flow, also a default page)
•Engine Trim (also a default page)
•Engine Diagnostics
•Synchronizer – displays RPM for up to three engines, allowing users to
synchronize the engines for smoother performance.
Note: Only supported in multi-engine setups.
This example will add an Engine Diagnostics page.
1. Press MENU.
Use UP or DOWN buttons to select PAGES.
Press ENTER.
2. Press ENTER to select ADD PAGE.
Customize
Pages
Screen
Audio Setup
System Setup
1 M E N U
Add Page
Remove Page
Page Scrolling
Popups Setup
M E N U
2
32