Table of Contents
Advertisement
b. Enter a switch description of 255 or fewer alphanumeric characters in the Description field.
c. Enter the switch physical location (255 or fewer alphanumeric characters) in the Location
field.
d. Enter the name of a contact person (255 or fewer alphanumeric characters) in the Contact
field.
2.
Click Activate to save the information. The message Your changes to the
identification configuration have been successfully activated is
displayed.
Configure date and time
Perform this procedure to configure the effective date and time for the switch. To set the date and
time:
1.
At the Configure window, click the Switch tab, then select the Date/Time tab. The Switch page is
displayed with Date/Time tab selected (highlighted red)
Figure 44
Switch page—Date/Time tab
a. Click the Date fields that require change, and enter numbers in the following ranges:
Month (MM): 1 through 12
Day (DD): 1 through 31
Year (YY): greater than 1980
b. Click the Time fields that require change, and enter numbers in the following ranges:
Hour (HH): 0 through 23
Minute (MM): 0 through 59
Second (SS): 0 through 59
2.
Click Activate to save the information. The message Your changes to the date/time
configuration have been successfully activated is displayed.
(Figure
44).
Edge Switch 2/32 installation guide
75
Advertisement
Table of Contents
