Table of Contents
Advertisement
4.
Click Backup. An Information dialog box is displayed, indicating the backup operation was
initiated
(Figure
Figure 60
Information dialog box
5.
Click OK to complete the backup operation and close the dialog box.
Restore the Configuration
To restore the switch configuration file from the management appliance:
1.
Notify the customer the switch is to be set offline. Ensure that the customer's system administrator
quiesces Fibre Channel frame traffic through the switch and sets attached FC-AL devices offline.
2.
Set the switch offline. For instructions, refer to
3.
At the HAFM appliance, open the HAFM application.
4.
At the HAFM application's physical map, right-click the product icon representing the switch for
which a configuration file is to be restored, then select Element Manager from the pop-up menu.
The application opens.
5.
Select Backup & Restore Configuration from the Maintenance menu. The Backup and Restore
Configuration dialog box is displayed.
6.
Click Restore. A Warning dialog box is displayed, indicating the existing configuration file is to
be overwritten.
7.
Click Yes. A Restore dialog box is displayed, indicating the restore operation is in progress.
8.
When the operation finishes, the Restore dialog box displays a Restore complete message. Click
Close to close the dialog box.
60).
"Set the switch
offline" on page 40.
Edge Switch 2/32 installation guide
93
Advertisement
Table of Contents
