c. At the HAFM application, select Discover > Setup. The Discover Setup page is displayed
(Figure
53).
Figure 53
Discover Setup page
d. Select (highlight) the entry representing the reset switch in the Available Addresses window
and click Change. The Domain Information dialog box is displayed
Figure 54
Domain Information dialog box
a. Enter 10.1.1.10 in the IP Address field and click OK. Entries at the Discover Setup dialog box
reflect the new IP address.
b. At the Discover Setup dialog box, click OK. Switch-to-management appliance communication
is restored and the procedure is complete.
(Figure
54).
Edge Switch 2/32 installation guide
85