Table of Contents
Advertisement
5.
Enter edge switch 2-32 in the Name field and click OK. The Connect To dialog box is displayed
(Figure
9).
Figure 9
Connect To dialog box
6.
Ensure that the Connect using field displays COM1 or COM2 (depending on the serial
communication port connection to the switch), and click OK. The Port Settings dialog box is
displayed
Figure 10
Port Settings dialog box
7.
Enter the Port Settings parameters as follows:
• Bits per second—115200
• Data bits—8
• Parity—None
• Stop bits—1
• Flow control—Hardware
When the parameters are set, click OK. The HyperTerminal window is displayed.
32
Installing and configuring the Edge Switch 2/32
(Figure
10).
Advertisement
Table of Contents
