Advertisement
Setting Speed
The device operates at speed cycles from 1 to 10 minutes per cycle.
To check the speed setting, depress and hold the SPEED button. To adjust
speed, depress and hold the SPEED button while simultaneously depressing
either the Up arrow (to increase speed) or Down arrow keys (to decrease speed).
Setting Pause Time
A pause time of between 1 and 30 seconds can be set, causing the device
to pause at the end of flexion and extension. These will be prescribed by
your physician.
To adjust or set the pause settings, hold the Extension Pause or Flexion Pause
button down while simultaneously depressing the desired up or down arrows.
Device Trouble Shooting
Problem: The Device is not working:
•
Make sure the device is plugged into the outlet.
•
If a light switch operates the outlet, make sure the switch is turned on.
Problem: Device stops at either top or bottom of the ROM.
•
Pause button needs to be reset to zero. See "Setting Pause Time" section
above/ on previous page.
Problem: Controller displays an error code.
•
Device needs to be reset. Turn the device off at the base power switch
and wait 30 seconds before turning back on.
Advertisement
