Shared Control - Avaya J139 User Manual

Procedure
1. Do one of the following:
• Lift the handset.
• Press Speaker.
• Press Headset.
2. (Optional) If you use the handset, press End Call to cancel dialing.
3. On the Phone screen, scroll to the required multicast page group, and press Select.
The phone displays the Paging <group name> box.
4. To end the multicast page, do one of the following:
• Press End Call.
• If you use the handset as an audio device, hang up.

Shared control

With the Shared Control feature, you can operate phones from the Avaya IX
client and use high quality audio of the phone. Shared control is supported on all the Avaya J100
Series IP Phones models.
Phones must be registered with Avaya Aura
log in to your phone and Avaya IX
the phone through Avaya IX
if multiple devices are registered to the same user, depending on the client implementation.
The Shared Control feature must be activated by the administrator and configured on Avaya IX
Workplace Client.
Note:
This feature is available only in Avaya Aura
You can perform the following tasks on the Avaya J100 Series IP Phones:
• make a call
• answer a call
• place and resume a call on hold
• mute and unmute a call
• call transfer
• conference
Notifications:
October 2019
®
to establish a shared control connection. When you
™
Workplace Client in the shared control mode, you can control
™
Workplace Client. A shared control session might not be established
®
environment.
Using Avaya J139 IP Phone SIP
Comments on this document? infodev@avaya.com
Advanced features
™
Workplace Client
™
59