Shared Control; Multicast Paging - Avaya J159 Manual

Advanced features
2. Follow the voice prompts to playback your voice messages.

Shared control

With the Shared control feature, you can use the Avaya Cloud Office
several call-related features of your phone. Use the same user account on the Avaya Cloud
™
Office soft client application and the phone to share control of call operations. In the shared
control mode, you can use the Avaya Cloud Office
• Make a call
• Answer a call
• Hold and resume a call
• End a call
When you pair your phone with the soft client, your phone has an audio connection for all the
calls. You can perform all the call operations from the soft client and use the audio from your
phone. The phone displays all the call operations on the screen and logs them in the call log when
you call from the soft client.
You can enable pairing of the soft client and the phone from the Avaya Cloud Office
For more information about pairing the device and using the soft client for call operations, see
Avaya Cloud Office
Note:
During the Shared control mode, the Avaya Cloud Office
operations you perform on the phone.
During the Shared control mode, if you enable the Call forward feature on your phone, you
cannot use Avaya Cloud Office

Multicast Paging

With the Multicast Paging feature, you can receive a page that will be automatically played on the
phone. If configured by the system administrator, you can send a multicast page to a group of
phones in the network.
An incoming multicast page is played on the phone speaker. When the page is played, the
Phone screen displays the Page from <group name> notification during the whole time of
transmission.
All configured multicast groups that you can send a page to are available in the Features menu.
You can add, move or delete the multicast page keys from the Phone screen by the common
customization procedure.
January 2024
™
documentation.
™
application to make a call.
Using Avaya J159 SIP IP Phone in Avaya Cloud Office
Comments on this document? infodev@avaya.com
™
client application to access
™
application to do the following:
™
application does not display the call
™
application.
™
64