Multiple Device Access; Activating The Screen Saver - Avaya J139 User Manual

Advanced features
Procedure
1. During an active call, access the Features menu.
2. To start a trace, scroll to Malicious call trace, and press one of the following:
• Select
• Corresponding line button
An alerting tone or flashing LED signifies the trace is active. Hanging up deactivates MCT
Act.
Important:
Some countries, states, and localities have laws that determine if and under what
circumstances you can use Malicious Call Trace (MCT). Before using the MCT feature,
you must understand and comply with these laws.

Multiple Device Access

With the Multiple Device Access (MDA) feature, you can register up to 10 SIP devices with the
same extension to transfer active calls between devices.
This feature is available only in an Avaya Aura
®
on Avaya Aura Session Manager.
MDA limitations
The limitations for Multiple Device Access are the following:
• There is no audio or visual alerting for the third incoming call if two call appearances are
already in use.
• When you receive an MDA indication, press the Phone button to view the details and join the
bridged call.
Related links
Handling calls and conferences using Multiple Device Access
Adding a participant to no hold conference

Activating the screen saver

Procedure
1. Press Main menu.
2. Press Applications.
3. Scroll down to Activate screen saver, and press Select.
October 2019
®
environment. Multiple Device Access is configured
on page 57
Using Avaya J139 IP Phone SIP
Comments on this document? infodev@avaya.com
on page 28
56