Power Contacts/Field Supply; Cage Clamp ® Connections; Table 1: Connections - WAGO 753-647 Manual

22 Device Description
Pos: 29 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Anschlüsse/Leistungskontakte/Feldversorgung - Überschrift 3 @ 6\mod_1256294692864_21.doc @ 43664 @ 3 @ 1
3.5.2

Power Contacts/Field Supply

Pos: 30 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Anschlüsse/Leistungskontakte 750-xxxx nicht vorhanden @ 8\mod_1281073936319_21.doc @ 62530 @ @ 1
The I/O module 753-647 has no power jumper contacts.
Pos: 31 /Serie 750 (WAGO-I/O-SYSTEM)/Wichtige Erläuterungen/Sicherheitshinweise/Hinweis/Hinweis: Potentialeinspeiseklemme einsetzen! @ 3\mod_1226499089640_21.doc @ 25026 @ @ 1
Use a supply module!
Use a supply module for field-side power supply of downstream I/O modules.
Pos: 32 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Anschlüsse/CAGE CLAMP-Anschlüsse - Überschrift 3 @ 6\mod_1256296337770_21.doc @ 43674 @ 3 @ 1
3.5.3 CAGE CLAMP
Pos: 33 /Serie 753 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Anschlüsse/Sonderklemmen/Anschlüsse 753-0647 @ 11\mod_1328522797770_21.doc @ 87738 @ @ 1
Table 9: Connections
Figure 4: Connections
Configuration diagram for connections!
The power supply configuration for the I/O module and the configuration for the
DALI network are shown in the figures given in the sub-sections "Power Supply
Configuration for 753-620" and "Power Supply Configuration for 787-1007". You
can also refer to the main section "Installation Notes"  "I/O Module Power
Supply."
Pos: 34 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
®
Connections
Connection Function
WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master Module
+ DALI DALI Bus connection +
- DALI DALI Bus connection -
+ U Supply +
- U Supply -
Manual
Version 1.0.0