Operating Elements - WAGO 753-647 Manual

24 Device Description
Pos: 37 /Alle Serien (Allgemeine Module)/Überschriften für alle Serien/Gerätebeschreibung/Bedienelemente - Überschrift 2 @ 4\mod_1239191655456_21.doc @ 30439 @ 2 @ 1
3.7

Operating Elements

Pos: 38 /Serie 753 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Bedienelemente/Busklemmen/Konfiguration und Parameteränderungen werden über den WAGO-DALI-Konfigurator durchgeführt (753-0647) @ 12\mod_1331199029009_21.doc @ 90440 @ @ 1
The 753-647 I/O module does not have any electro-mechanical operating
elements.
Changes to the configuration and parameters are made via the higher-order
control, or using the special WAGO-DALI Configurator.
Pos: 39 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
flashing
RxD
F
(Receiving)
Yellow
flashing
Voltage check
G for the DALI
line
Yellow
Latching relay
function
H
Firmware Yellow
update flashing
WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master Module
Green
Signal transmission RxD.
TxD signal transmission present, but
some of the received frames are
faulty (data frame error/collision
occurred).
Voltage present, power supply for
Green DALI line activated via the I/O
module.
Voltage present, power supply for
DALI line via I/O module de-
activated.
Red No voltage detected within 500 ms.
Off Latching relay function Off.
Green Latching relay function On.
Firmware update being performed.
Manual
Version 1.0.0