WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master Module
Pos: 35 /Alle Serien (Allgemeine Module)/Überschriften für alle Serien/Gerätebeschreibung/Anzeigeelemente - Überschrift 2 @ 4\mod_1240984390875_21.doc @ 31964 @ 2 @ 1
3.6
Display Elements
Pos: 36 /Serie 753 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Anzeigeelemente/Sonderklemmen/Anzeigeelemente 753-0647 @ 11\mod_1328522934021_21.doc @ 87741 @ @ 1
Table 10: Display Elements
Manual
Version 1.0.0
LED
Designation
A
Easy Mode
TxD
B
(transmit)
C
Function
1- or 2-button
mode (Easy
Mode)
D
Firmware
Update
E
Full-Modus
Device Description
Status
Function
Green
Easy mode is active.
Green
Easy mode being initialized.
flashing
Yellow
No addressed devices found, current
flashing
configuration being read.
No addressed devices found,
configuration from the internal
Green-
database was not read
yellow
(I/O module has no current
flashing
configuration; function may
therefore be limited.).
Addressed device found, no current
Yellow
configuration read.
Green
Signal transmission TxD
flashing
Red
Could not transmit telegrams.
flashing
Off
No signal transmission TxD
Not ready for operation, or no or
Red
disrupted internal bus
communication.
Ready for operation and undisturbed
Green
internal bus communication.
Off
1-button mode (only in Easy Mode).
Green
2-button mode (only in Easy Mode).
Yellow
Firmware update being performed.
flashing
Green
Full mode activated.
Green
Full mode being initialized.
flashing
Yellow
No addressed devices found.
flashing
No addressed devices found,
configuration from the internal
database was not read
Yellow
(I/O module has no current
configuration; function may
therefore be limited.).
23