When the VPN connection established, the VPN IP Address should be displayed in the VPN
status option. There may be some delay of the connection establishment. User may need to
refresh the page to update the status.
Once the VPN is configured, the device will try to connect with the VPN server automatically
every time it boots up, unless user disable VPN. Sometimes, if the VPN connection does not
establish immediately, user may try to reboot the device and check again.
OpenVPN
To establish an OpenVPN connection, user should get the following authentication and
configuration files from the OpenVPN service provider and name them as the following,
OpenVPN Configuration file:
CA Root Certification:
Client Certification:
Client Key:
Select OpenVPN files and then click upload to upload these files to the device in the webpage
[Network] >> [VPN]. Then user should check "Enable VPN" and select "OpenVPN" in VPN
Mode and click "Apply" to enable OpenVPN connection.
Same as L2TP connection, the connection will be established every time system boots up
unless the user disable it manually.
9.12 Line >> SIP
client.ovpn
ca.crt
client.crt
client.key
2 7