Fanvil i10 User Manual page 55

Security Settings
Parameters
Basic Settings
Ringtone Duration
Input & Tamper
Server Address
Input settings
Input Detect
Triggered by
Triggered Action
Figure 40 - Security Settings
Table 22 - Security Settings
Description
Set the ringtone duration, default value is 5 seconds.
Set remote server address. The device will send message to the
server when the alarm is triggered. The message format is
Alarm_Info:Description=i10;SIP
port=Input .
Enable or disable Input Detect
When choosing the low level trigger (closed trigger), detect the input
port (low level) closed trigger.
When choosing the high level trigger (disconnect trigger), detect the
input port (high level) disconnected trigger.
Send SMS: Set the alert message send to server if selected.
Dss Key: The device will perform corresponding Dss Key
configurations if any key is selected, by default the value is none.
Triggered Ringtone: Select triggered ring tone.
User=;Mac=0c:38:3e:3a:06:65;IP=;
4 9