Fanvil i10 User Manual page 30

Parameters Description
Network
IPv4 only IPv6 only IPv4&IPv6
Mode
Network Status
IP The current IP address of the equipment.
Subnet
The current Subnet Mask of the device.
mask
Default
The current Gateway IP address.
gateway
MAC The MAC address of the equipment.
Settings
Select the appropriate network mode. The equipment supports three kinds of network
mode:
Network parameters must be entered manually and will not change. All
Static IP parameters are provided by the ISP. Please contact ISP or network
administrator for help if you do not know these information.
DHCP Network parameters are provided automatically by a DHCP server.
Account and Password must be input manually. These are provided by
PPPoE
your ISP.
Enable
When enabled, you will see the vendor identifier information in the
Vendor
DHCP option60 field
Identifier
Vendor Support for customization. When vendor identity is enabled, you will
Identifier see the vendor identifier information in the DHCP option60 field
DNS Server
Configured Select the Configured mode of the DNS Server.
by
Primary DNS
Enter the server address of the Primary DNS.
Server
Secondary
Enter the server address of the Secondary DNS.
DNS Server
Notice
1 After set the parameters, click Apply to make settings take effect.
2 If you change the IP address, the current webpage will no longer respond, user
should enter new IP address in URL to re-connect and re-login to the device's
webpage.
2 4
Table 10 - Network Basic Setting