Fanvil i10 User Manual page 35

Parameters
Register Settings
Line Status
Activate
Username
Authentication User
Display Name
Authentication Password
Realm
Server Name
SIP Server 1
Server Address
Server Port
Transport Protocol
Registration Expiration
SIP Server 2
Server Address
Server Port
Transport Protocol
Registration Expiration
SIP Proxy Server Address
Proxy Server Port
Proxy User
Proxy Password
Backup Proxy Server Address
Backup Proxy Server Port
Basic Settings
Enable Auto Answering
Auto Answering Delay
Enable Hotline
Hotline Delay
Hotline Number
Table 111 - SIP
Description
Display the current line status. To get the latest line status, user
has to refresh the page manually.
Whether to activate the line or not.
Enter the username of the service account.
Enter the authentication user name of the service account.
Enter the display name which will be sent in a call request.
Enter the authentication password of the service account.
Enter the SIP domain provided by the service provider.
Input server name.
Enter the IP or FQDN address of the SIP server
Enter the SIP server port, default is 5060
Set up the SIP transportation protocol: TCP or UDP or TLS.
Set SIP registration expiration time.
Enter the IP or FQDN address of the SIP server
Enter the SIP server port, default is 5060
Set up the SIP transportation protocol: TCP or UDP or TLS.
Set SIP registration expiration time.
Enter the IP or FQDN address of the SIP proxy server.
Enter the SIP proxy server port, default is 5060.
Enter the SIP proxy username.
Enter the SIP proxy password.
Enter the IP or FQDN address of the backup proxy server.
Enter the backup proxy server port, default is 5060.
Enable auto-answering, the incoming calls will be answered
automatically after the delay time.
Set the delay time for incoming call before the system
automatically answers it.
Enable hotline configuration, the device will dial the specific
number immediately once audio channel is opened.
Set the delay time for hotline before the call sends out.
Set the hotline dialing number
2 9