Fanvil i10 User Manual page 27

device will download and update.
DHCP Option
The equipment supports configuration from Option 43, Option 66, or a
Option Value Custom DHCP option. User can select any of the three method to
perform auto provision, by default, the option is disabled.
Custom Option The custom option value should be same with the one of server, it can
Value be any number from 128 to 254.
Enable DHCP
Set the SIP server address through DHCP option 120.
Option 120
SIP Plug and Play (PnP)
Whether enable PnP or not. If PnP is enable, i10 series device will
send a SIP SUBSCRIBE message with broadcast method. Any server
Enable SIP PnP
which can support the feature will respond and send a Notify with URL
to phone. The device could get the configuration file with the URL.
Server Address Input SIP PnP server address.
Server Port Input SIP PnP server port.
Transport Protocol Select SIP PnP protocol, TCP or UDP.
Update Interval Configure SIP PnP message interval.
Static Provisioning Server
Set FTP/TFTP/HTTP server IP address for auto update. The address
can be an IP address or Domain name, for example ftp.domain.com.
Server Address And
192.168.1.1/ftp/config or ftp.domain.com/ftp/config, it means server
address is 192.168.1.1 or ftp.domain.com, file path is /ftp/config/.
Configuration File Input the configuration file name. If it is empty, i10 series device will
Name request the file which is named as its MAC address.
Select
Protocol Type
FTP/TFTP/HTTP and HTTPS
Set configuration file update interval time. As default it is 1, which
Update Interval
means i10 series will check the update every 1 hour.
Select Provision Mode:
1. Disabled.
Update Mode
2. Update after reboot.
3. Update at a time interval.
TR069
Enable TR069 Select it to enable TR069.
Enable TR069 If TR069 is enabled, there will be a prompt tone when connecting to
Warning Tone TR069 server successfully.
the device supports
transportation protocol
to access server
type, i10 series
subdirectory,
support
2 1