Fanvil i10 User Manual page 37

Keep Alive Type
Keep Alive Interval
Keep Authentication
Blocking Anonymous Call
User Agent
Specific Server Type
SIP Version
Anonymous Call Standard
Local Port
Ring Type
Enable user=phone
Use Tel Call
Auto TCP
Enable Rport
Enable PRACK
DNS Mode
Enable Long Contact
Enable Strict Proxy
Convert URI
Use Quote in Display Name
Enable GRUU
Sync Clock Time
Enable Inactive Hold
Caller ID Header
Use 182 Response for Call
waiting
Enable Feature Sync
Enable SCA
CallPark Number
separate SIP registration server and BLF server.
Set the line to use dummy UDP or SIP OPTION packet to keep
NAT opened.
Set the keep alive packet transmitting interval.
Keep the previous authentication parameters.
Reject any incoming call without presenting caller ID.
Set the user agent, the default value is device model with software
version.
Set the line to collaborate with specific server type.
Set the SIP version.
Set the standard for anonymous call.
Set the local port.
Set the ring tone type for the line.
In SIP invite message, there is user=phone field.
Enable or disable use tel call.
Using TCP protocol to guarantee usability of transport for SIP
messages above 1500 bytes.
Set the line to add Rport in SIP headers.
Set the line to support PRACK SIP message.
Select DNS mode, options are A, SRV and NAPTR.
Enable this will allow more parameters in contact field per RFC
3840. This option should work together with SEM server.
This is used for matching special server. When the i10 series
receives packets from the server it will reply with the source IP
address, not the address in via field.
Whether to enable convert URI or not.
Whether to add quote in display name, i.e. "Fanvil" vs Fanvil.
Enable Globally Routable User-Agent URI (GRUU) or not.
Time Sync with server.
With inactive hold enabled, you can see SDP is inactive in the
SDP packet.
Set the Caller ID Header.
Set the device to use 182 response code at call waiting.
Enable or disable Feature Sync with server.
Enable/Disable SCA (Shared Call Appearance )
Set the CallPark number.
3 1