Fanvil i10 User Manual page 26

Transferring protocol: FTP/ TFTP/HTTP/HTTPS
More details, please refer to Fanvil Auto Provision.
http://www.fanvil.com/Support/download/cid/14.html
Parameters
Basic settings
Current
Configuration
Version
General
Configuration
Version
CPE Serial
Number
Authentication
Name
Authentication
Password
Configuration File
Encryption Key
General
Configuration File
Encryption Key
Save Auto
Provision
Information
Download Fail
Check Times
Enable Server
Digest
2 0
Table 8 - Auto Provision
Description
Show the current config file's version. If the device confirm the
downloaded .CFG configuration file is same with the one it uses, the
device won't perform auto provision. Or if the device is matching the
configuration file's context via Digest method, when the configuration
file of server is modified or configuration file of device is different with
server's, the device will perform provision.
Show the common config file's version. If the device confirm the
downloaded .CFG configuration file is same with the one it uses, the
device won't perform auto provision. Or if the device is matching the
configuration file's context via Digest method, when the configuration
file of server is modified or configuration file of device is different with
server's, the device will perform provision.
Serial number of the equipment
Configure FTP server's username, TFTP server does not require this
option. When use FTP server, device uses anonymous as
authentication name if user leave this option blank.
Corresponding password for FTP server.
Encryption key for the encrypted configuration file.
Encryption key for encrypted common configuration file.
Configure whether to save the auto provision information or not.
The default value is 5. When device fails to download configuration
file, it will retry until it counts to fail check times.
When the feature is enabled, if the configuration file of server is
changed, or device's configuration is different from server's, the