Line >> Sip - Fanvil i51W User Manual

Parameter
Web Server Type
Web Logon Timeout
Web auto login
HTTP Port
HTTPS Port
RTP Port Range Start
RTP Port Quantity
9.11 Line >> SIP
Configure the Line service configuration on this page.
Parameters
Register Settings
Line Status
Activate
Username
Authentication User
Display Name
Authentication Password
Realm
Server Name
SIP Server 1
Server Address
Server Port
25
Table 9 - Service port
Description
Reboot to take effect after settings. Optionally, the web page
login is HTTP/HTTPS.
Default as 15 minutes, the timeout will automatically exit the
login page, need to login again.
After the timeout does not need to enter a user name password,
will automatically login to the web page.
The default is 80. If you want system security, you can set ports
other than 80.
Such as :8080, webpage login: HTTP://ip:8080
The default is 443, the same as the HTTP port.
The value range is 1025 to 65535. The value of RTP port starts
from the initial value set. For each call, the value of voice and
video port is added 2.
Number of calls.
Table 10 - Line configuration on the web page
Description
Display the current line status at page loading. To get the up to date line
status, user has to refresh the page manually.
Whether the service of the line is activated
Enter the username of the service account.
Enter the authentication user of the service account
Enter the display name to be sent in a call request.
Enter the authentication password of the service account
Enter the SIP domain if requested by the service provider
Input server name.
Enter the IP or FQDN address of the SIP server
Enter the SIP server port, default is 5060