Line >> Sip - Fanvil i12 User Manual

Enable web page filtering: configure enable/disable web page access filtering; Click the "apply" button
to take effect.
Note: if the device you are accessing is in the same network segment as the phone, please do not
configure the filter segment of the web page to be outside your own network segment, otherwise you
will not be able to log in the web page.
9.13 Line >> SIP
Configure the service configuration of the line on this page.
SIP
Field Name
Basic Settings (Choose the SIP line to configured)
Line Status
Username
Display name
Authentication
Name
Authentication
Password
Activate
SIP Proxy Server
Address
29
Figure 24 - SIP
Table 10 - SIP
Explanation
Display the current line status at page loading. To get the up to date
line status, user has to refresh the page manually.
Enter the username of the service account.
Enter the display name to be sent in a call request.
Enter the authentication name of the service account
Enter the authentication password of the service account
Whether the service of the line should be activated
Enter the IP or FQDN address of the SIP proxy server