Connecting And Routing Power Cables - IBM Power Systems S812LC 8348-21C Installation Manual

Figure 7. Aligning the lower roller pins on the chassis rails with the grooves in the rack slide rails
3. Simultaneously lift the latches on either side of the rack (B) that are marked with a green arrow.
4. Push the system into the rack.
5. Tighten the thumbscrews on either side of the system to secure the system to the rack.

Connecting and routing power cables

Learn how to connect and route power cables in the IBM Power System S812LC (8348-21C) system.
Procedure
1. To connect the power cables, complete the following steps:
a. Plug the power cords into the power supplies.
b. Attach all cables to the rear of the server.
Installing and configuring the system
9