Figure 54. Removing the 3.5 inch drive from the tray
v For a 2.5 inch drive, turn the tray over. Unfasten the drive from the bottom of the tray by removing
four screws, as shown in Figure 55.
Figure 55. Removing the 2.5 inch drive from the tray
Replacing a front drive in the 8348-21C
Learn how to remove a front drive in the IBM Power System S812LC (8348-21C) system.
Procedure
1. Ensure that you have the electrostatic discharge (ESD) wrist strap attached. If not, attach it now.
78
Installing the System and Ordered Parts for the 8348-21C