Table of Contents
Advertisement
c. Fasten the drive to the bottom of the tray by using four screws, as shown in Figure 17.
Figure 17. Screw locations for the 2.5 inch drive
d. Turn the tray over so that the drive is facing up.
6. Hold the drive tray by the bottom as you position the drive. Slide the drive tray all the way into the
system. Push the drive tray in until the handle starts to close, then push the handle in until it locks.
as shown in Figure 18 on page 19.
18
Installing the System and Ordered Parts for the 8348-21C
Advertisement
Table of Contents
