Table of Contents
Advertisement
Figure 29. Installing the (FC EC3S) PCIe Gen3 SAS/SATA RAID adapter (A) and screw (B)
g. Route the disk drive signal cables along the top of the PCIe adapters to keep the cables from
damaging the adapters. Do not route the cables between the adapters. Spread the cables to
ensure that the service access cover can be closed without pinching the cables. See Figure 30 on
page 31 for an example of how to route the cables along the top of the PCIe adapters. Your cable
connections may differ from Figure 30 on page 31, but how the cable is routed along the top of
the PCIe adapters will not differ.
30
Installing the System and Ordered Parts for the 8348-21C
Advertisement
Table of Contents
