Table of Contents
Advertisement
Figure 6. Installing the slide rail at the rear of the rack
Installing the system into the rack by using the slide rails
Learn how to install the system into the rack by using the slide rails.
About this task
Note: This system requires two people to install the system into the rack.
Procedure
1. Fully extend the slide rails until the rails click into the service position (A).
2. Using two people, lift the system and align the lower roller pins on the chassis rails with the grooves
in the rack slide rails on both sides.
8
Installing the System and Ordered Parts for the 8348-21C
Advertisement
Table of Contents
