Table of Contents
Advertisement
2. Install a drive into the tray. Orient the drive such that the connectors are pointing to the rear of the
drive.
v A 3.5 inch drive fills the tray, as shown in Figure 56. Fasten the drive to the sides of the tray with
four screws (2 on each side).
Figure 56. Mounting the 3.5 inch drive in the tray
v A 2.5 inch drive must be positioned at the rear of the tray. While you hold both the drive and the
tray, turn the tray over. Fasten the drive to the bottom of the tray with four screws, as shown in
Figure 57.
Figure 57. Mounting the 2.5 inch drive in the tray
79
Additional procedures
Advertisement
Table of Contents
