Table of Contents
Advertisement
Figure 31. Installing the PCIe adapter (A) and screw (B)
9. Using your labels, replace any plugs that you removed from the PCIe adapter. Insert the cables into
the PCIe adapter.
10. The procedure is complete.
What to do next
Prepare the system for operation. For instructions, see "Preparing the system for operation after removing
and replacing internal parts for the 8348-21C" on page 61.
PCIe adapters feature code list
Find information about using and managing the Peripheral Component Interconnect (PCI) Express (PCIe)
adapters for the 8348-21C system. Also, find information about specifications and installation notes for
specific adapters.
PCIe2 LP 4-port 1GbE Adapter (FC 5260; CCIN 576F)
Learn about the specifications and operating system requirements for the feature code (FC) 5260 adapters.
Overview
FC 5260 and FC 5899 are both the same adapter with different feature codes. FC 5260 is a low-profile
adapter and the FC 5899 is a full-height adapter. The names of these two adapters are:
v FC 5260: PCIe2 LP 4-port 1GbE Adapter
v FC 5899: PCIe2 4-port 1GbE Adapter
The PCIe2 LP 4-port 1GbE Adapter is a short, low-profile, generation-2 PCIe adapter. This adapter
provides four 1-Gb Ethernet ports that can be configured to run at 1000 megabits per second (Mbps) (or 1
gigabit per second (Gbps)), 100 Mbps, or 10 Mbps. The adapter connects to a network that uses
unshielded twisted pair (UTP) cable for distances of up to 100 meters (328.08 feet). The adapter supports
32
Installing the System and Ordered Parts for the 8348-21C
Advertisement
Table of Contents
