Terminology Of Rcu Controls - Barco OVERVIEW CDG67-DL Installation Manual

Hide thumbs Also See for OVERVIEW CDG67-DL:
Table of Contents

Advertisement

6.2.1 Terminology of RCU controls

1
Function keys
2
ADJ
3
Address key
4
Selection key
5
PAUSE
6
Standby
7
Mute
8
Help
9
Digit buttons
10
Audio controls
11
Picture controls
12
PHASE
13
Freeze
14
TEXT
15
ENTER
16
Cursor Keys
17
EXIT
18
RC operating
indication
Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005
have no function for this projector
ADJUST key, to enter or exit the adjustment mode.
(recessed key), to enter the address of the projector (between 0 and 9). Press the
recessed address key with a pencil, followed by pressing one digit button
between 0 and 9.
has no function for this projector
has no function for this projector
stand by button, to start projector when the power switch is switched on and to
switch off the projector without switching off the power switch.
has no function for this projector
has no function for this projector
To enter the remote control address
have no function for this projector
Except for brightness and contrast, these keys have no function for this projector.
The controls of brightness and contrast are only enabled in case the optical
dimmer is disabled, cf.
Error! Reference source not found.
Error! Reference source not found.
Error! Reference source not found.
Error! Reference source not found.
has no function for this projector
has no function for this projector
has no function for this projector
to start up the adjustment mode or to confirm an adjustment or selection in the
adjustment mode.
to make menu selections when in the adjustment mode.
RCU
cursor key up
cursor key down
cursor key right
cursor key left
Use the cursor keys up or right for increasing a value.
Use the cursor keys down or left for decreasing a value.
to leave the adjustment mode or to scroll upwards when in the adjustment mode.
lights up when a button on the remote control is pressed. (This is a visual indicator
to check the operation of the remote control)
6. Final Adjustment and Configuration
________________________________________________________________
6-2

Advertisement

Table of Contents
loading

Table of Contents