Control Panel Terminology; Rcu Control Panel Terminology - Barco Graphics 808s Owner's Manual

Location and Functions of Control

CONTROL PANEL TERMINOLOGY

a. Gaining access to the keyboard
The local keypath is underneath the top cover door with the BARCO logo.
To open this door, push and turn it to the front side of the projector.
This local keypad has the same functions as the Remote Control Unit (RCU).
b. RCU control panel
This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the projector remotely.
This remote control is used for source selection, control, adaptation and set-up. It includes automatic storing of :
- Picture controls (Brightness, Sharpness,....)
- Picture geometry adjustments
- Convergence adjustments
Other functions of the remote control are:
- Switching between standby and operational modes
- Switching to "pause" (blanked picture, full power for
immediate restarting)
- Direct access to all connected sources
- Variable adjustment speed : when pushing continuously on the control stick or the picture keys, the adjustment will be
executed in an accelerated fashion.
(;,7
$'-
(17(5
67%< 7(;7
3$86(



6+$531(66




7,17
 


&2/25
 


%5,*+71(66
 


&2175$67
F
2-2
All manuals and user guides at all-guides.com
stand-by
pause/park
sharpness
tint
color
brightness
contrast
1 Back light key : When activated, all keys will be lit up and
visible in the dark.
2 ADJ. : Adjust key, to enter or exit the adjustment mode.
3 Address key (recessed key), to enter the address of the
projector (between 0 and 9).
followed by pressing one digit button between 0 and 9.
4 STBY : Stand by button :
- To initiate remote power up operation
- To stop projection without main power off.
5 Pause : To blank the image, press PAUSE. The image
disappears but full power is retained for immediate restart-
ing.
6 Digit buttons : Direct input selection.
7 Picture controls : Use these buttons to obtain the desired
level (see also 'Controlling') for each picture function.
8 TEXT : When adjusting one of the image controls during a
meeting, the displayed bar scale can be removed by pressing
'TEXT' key first. To re-display the bar scale on the screen,
press 'TEXT' key again. 'TEXT' key is only active in operational
mode. When 'TEXT' is off, no warning message will be
displayed.
11 Control stick key : To make menu selections when in the
adjustment mode. Also allows to increment or decrement an
adjustment in the adjustment mode.
control stick forward = up arrow in the menus
control stick backward = down arrow in the menus
control stick to the right = arrow to the right on the menus
control stick to the left = arrow to the left on the menus
15 RC operating indication : Lights up (green) when a button
on the remote control is pressed. (This is a visual indicator
to check the operation of the remote control)
5976283 BARCOGRAPHICS 808s 160403
Press the address key,