Siemens FC121-ZA Technical Manual page 88

Appendix C: History log
Message
Fire alarm
Zone #
Fault
Zone #
Isolation
Zone #
Fault
Output #
Fault
AUX 24V output
Isolation
Output #
Active
Output #
Isolation
Fault dialer
Isolation
Alarm dialer
Isolation
Sounder outputs
Isolation
EVAC sounder NL
Fault
Mains power
Fault
Battery
Fault
External PSU
Fault
Earth fault
Fault
Set date & time
Input
Input #
Reset
Input
Input #
Level 2 access
Input
Input #
Alarm and fault dialer isolated
Input
Input #
Manned operation
Input
Input #
Alarm dialer fault
Input
Input #
Alarm dialer confirmation received
Input
Input #
Alert active
88
Smart Infrastructure
Meaning
Zone # has triggered an alarm.
Zone # is in fault state.
Zone # was disabled.
Output # is in fault state.
Auxiliary 24 V output is in fault state.
Fire output # was disabled.
Output # is activated when V1 / V2 is running.
'Fault dialer' outputs were disabled.
'Alarm dialer' outputs were disabled.
Sounder outputs were disabled.
'EVAC sounder NL' outputs were disabled.
Fault in 230 V (or 110 V) power supply.
Fault in the battery power supply.
Fault in external power supply unit.
Grounding fault.
Date and time was not set.
Panel has been reset when get signal from input.
Panel is into access level 2 when get signal from input.
Isolation of the output 'Alarm dialer' and 'Fault dialer' when get signal
from input.
Panel is in 'Manned' mode when get signal from input.
The output 'Alarm dialer' is in fault state when get signal from input.
Alarm dialer confirmation received when get signal from input.
Panel is in 'Alert' mode when get signal from input.
A6V10393190_h_en_--
2019-09-01