Buttons - Siemens FC121-ZA Technical Manual

5.4
No. Description
1 MORE ALARM
2 RESET
3 ACKNOWLEDGE
4 SILENCE BUZZER
5 SILENCE
RESOUND
MANNED /
6
UNMANNED
7 LAMP TEST
8 CANCEL
9 OK
10 MENU
11 NAVIGATION
Smart Infrastructure

Buttons

The following buttons are available:
1
Function
Move to the next 'fire alarm'.
Reset the fire control panel to quiescent condition.
· Starts the investigation time V2 (AVC).
· Silence the buzzer until a new alarm event occurs.
· Silence the sounder until a new event occurs (if programmed).
Silence the buzzer until a new event (alarm, alert or fault) occurs.
· Silence the sounder control(s) in the event of alarm.
· Manually re-activate the sounder control(s) during alarming.
· If programmed, activation of all sounder control(s)
(activation mode only in quiescent condition).
· Switch between manned / unmanned.
· Cancel the alarm delay V1 / V2 when V1 / V2 is running.
Activate all LEDs, the buzzer and the display on the PMI.
Move one step back without saving the change.
Confirm the selected value.
Enter the main menu.
· Select the menu or change the time: <p> and <q>.
· Change the selection: <t> and <u>.
· Change to the next level or select value in the checkbox: <u>.
11
▲
◄ ►
▼
2 3 4
10
9
8
7
6
5
39
A6V10393190_h_en_--
2019-09-01