Default Network Settings - Canon GM2000 Series Online Manual

Default Network Settings

LAN Connection Defaults
Item
Change wireless/wired LAN
Network name (SSID)
Wi-Fi security
IP address (IPv4)
IP address (IPv6)
Set printer name*
Enable/disable IPv6
Enable/disable WSD
Timeout setting
Enab./disab. Bonjour
Service name
LPR setting
RAW protocol
LLMNR
PictBridge commun. (Enable/disable) Enable
DRX setting (Wired LAN)
("XX" represents alphanumeric characters.)
* Default value depends on printer. To check value, print the printer's current network settings.
Printing Network Settings
Wireless Direct Defaults
Item
Network name (SSID) for wireless direct XXX-GM2000series *1
Password
Security method
*1 "XXX" represents last three digits of printer's MAC address.
Default
Disable LAN
BJNPSETUP
Disable
Auto setup
Auto setup
XXXXXXXXXXXX
Enable
Enable
15 minutes
Enable
Canon GM2000 series
Enable
Enable
Enable
Enable
Default
YYYYYYYYY *2
WPA2-PSK (AES)
38