Download  Print this page

Canon GM2000 Series Online Manual Page 299

Hide thumbs

Advertisement

Opening the Maintenance Tool (Canon IJ Printer Assistant Tool)
3. Select Custom Settings.
4. Select Prevents paper abrasion check box and select OK.
5. Check message and select OK.
If intensity is set high, reduce intensity setting and try printing again.
Check5
If you are printing with a high intensity setting on plain paper, the paper may absorb too much ink and become
wavy, causing paper abrasion.
Adjusting Intensity
Is paper feed roller dirty?
Check6
Clean paper feed roller.
Cleaning the Paper Feed Rollers
Note
• Cleaning the paper feed roller abrades it, so do this only when necessary.
Is inside of printer dirty?
Check7
During duplex printing, ink may stain the inside of the printer, smudging the printout.
Perform bottom plate cleaning to clean inside of printer.
Cleaning Inside the Printer (Bottom Plate Cleaning)
Note
• To prevent staining inside the printer, be sure to set the correct paper size.
Set longer ink drying time.
Check8
This allows the printed surface to dry, preventing smudges and scratches.
Set it on the computer (Windows).
1. Check that printer is turned on.
2. Open Canon IJ Printer Assistant Tool.
Opening the Maintenance Tool (Canon IJ Printer Assistant Tool)
3. Select Custom Settings.
4. Drag Ink Drying Wait Time slide bar to set the wait time and select OK.
5. Check message and select OK.
299

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: