Printer Cannot Be Used After Replacing Wireless Router Or Changed Router Settings - Canon GM2000 Series Online Manual

Printer Cannot Be Used After Replacing Wireless Router or
Changed Router Settings
When you replace a wireless router, redo the network setup for the printer according to the replaced one.
Perform setup from the web page.
For Windows, you can perform setup using the Setup CD-ROM.
Note
• IJ Network Device Setup Utility allows you to diagnose and repair the network status.
Select the link below to download IJ Network Device Setup Utility and install it.
Checking Printer Connection Status Using IJ Network Device Setup Utility
See below for starting up IJ Network Device Setup Utility.
Starting Up IJ Network Device Setup Utility
If this does not solve the problem, see below.
Cannot Communicate with Printer After Enabling MAC/IP Address Filtering or Encryption Key on
Wireless Router
With Encryption On, Cannot Communicate with Printer After Changing Encryption Type at Wireless
Router
Cannot Communicate with Printer After Enabling MAC/IP Address
Filtering or Encryption Key on Wireless Router
Check wireless router setting.
Check1
To check the wireless router setting, see the instruction manual provided with the wireless router or contact its
manufacturer. Make sure the computer and the wireless router can communicate with each other under this
setting.
If filtering MAC addresses or IP addresses at wireless router, check that MAC
Check2
addresses or IP addresses for computer, network device, and printer are registered.
If using WPA/WPA2 key or a password, make sure encryption key for
Check3
computer, network device, and printer matches key set for wireless router.
272