Printouts Are Blank/Blurry Or Fuzzy/Streaks Or Lines - Canon GM2000 Series Online Manual

Hide thumbs Also See for GM2000 Series:
Table of Contents

Advertisement

Printouts Are Blank/Blurry or Fuzzy/Streaks or Lines

Although some air may enter the ink tube, it is not a malfunction. No problem if the nozzle check pattern is
printed correctly.
Make sure joint button is not lifted up.
Check1
Push the print head locking cover to make sure the print head is installed properly.
Next, push the joint button firmly to the end.
Finally, push the cartridge locking cover to make sure the contact protector or FINE cartridge is installed
properly.
Check Installation of Print Head
Important
• Remove the orange label and the protective tape of the print head to install it.
Check paper and print quality settings.
Check2
Printout Results Are Unsatisfactory
Are the print head nozzles clogged?
Check3
Print the nozzle check pattern and make sure that the ink is coming out normally.
For details on printing the nozzle check pattern, print head cleaning, and print head deep cleaning, see
Is Faint or
Uneven.
Print the nozzle check pattern.
Step1
After printing the nozzle check pattern, examine the pattern.
Printing a Nozzle Check Pattern
If the pattern is not printed correctly, go to the next step.
Clean the print head.
Step2
292
If Printing

Advertisement

Table of Contents
loading

Table of Contents